The Hurdle Rate Test is familiar to nearly everyone in business seeking funding for projects, acquisitions, or investments.
Financial officers define hurdle rate (HR) as the minimum rate of return they will consider when evaluating investment and action proposals. As a result, the hurdle rate has several other, less-colorful names, such as Minimum Acceptable Rate of Return (MARR), Required Rate of Return (RRR), or just Target Rate (TR).
Screening Projects, Acquisitions, Special Actions
The hurdle rate serves as a preliminary screening test for businesspeople proposing projects, acquisitions, and particular actions such as initiatives or campaigns.
- Proposals that out-perform the hurdle rate, credibly, advance to a full-scale proposal review, where they compete with other proposals for the organization's available funds.
- Proposals that fail the hurdle test due to a low score, or credibility issues, are essentially dead. These proposals typically receive no further consideration in the current review cycle.
Deciding Investment Proposals in One Step
By contrast, proposals for securities investments or other financial instruments, commonly face only the hurdle rate test. For these proposals, clearing a risk-adjusted hurdle rate leads directly to funding approval.
Two Ways to Clear the Same Hurdle
Financial officers usually perform the hurdle test by comparing two numbers directly.
- Test Approach 1. Proposal authors compute a rate of return for the proposal, then compare that directly with the target hurdle rate the organization sets for them. Proposals that exceed the target rate clear the hurdle.
The same people sometimes take a mathematically different approach to make virtually the same comparison indirectly.
- Test Approach 2. This approach begins by calculating the net present value (NPV) of the proposal's net cash flow stream forecast. The organization's target hurdle rate serves as the discount rate (interest rate) for the NPV calculations. If the resulting NPV is positive, the proposal passes the hurdle test.
In most cases, these two approaches are mathematically equivalent or nearly so. The first approach is simple and easy for non-financial people to understand. The second approach makes the same comparison, but also provides a net NPV for the proposal—the magnitude of the future returns in present-value currency units. This NPV is useful information in funding contests where both large and small size requests are competing.
For more on test specifics, including adjustments for risk, see "The Hurdle Rate Test" below.
Hurdle Rate Role and Purpose in Funding Decisions
Hurdle tests serve two purposes that benefit the entire organization.
- First, the hurdle disqualifies proposals that cannot meet the organization essential financial and risk criteria from further consideration. Hurdle rate screening lowers the risk of funding proposals that ultimately cost the organization more than they return.
- Second, the hurdle rate test lightens the workload for reviewers in the full-scale review process. Serious reviews are time and labor-intensive for everyone. Hurdle rate screening enables reviewers to concentrate on the more promising proposals.
Once the hurdle test is out of the way, reviewers then consider quite a few different criteria to develop priority scores for proposal. For this, proposal authors frequently provide reviewers with a complete business case analysis that
- Projects likely costs, benefits, and risks that follow from accepting the proposal.
- Compares the outcomes likely from the proposal in view, with results from alternative courses of action, or no action.
Keys to Hurdle Test Success
The real challenge in the hurdle rate test is not merely producing a proposal rate of return that clears the hurdle. The real need, instead, is to provide a credible rate of return that clears the hurdle.
Nearly everyone seeking funding approval almost certainly knows in advance the "passing score" for the hurdle test. No surprise—very few show up for the test with a losing score in hand. In business, everywhere, the overwhelming majority of proposals that fail at the hurdle do clear the hurdle. They lose anyway because financial officers and reviewers have low confidence in the proposal's ability to deliver returns at that rate.
Selecting cost and benefit data that lead to a high return rate is relatively easy. The critical challenge is making a credible case that the return rate is realistic, not overly optimistic.
Critical Skills for Hurdle Test and Review
Certain business skills give proposal authors a competitive edge in preparing credible, realistic entries for the hurdle test. The same abilities incidentally, also enable the author to build strong business case support for the proposal review that follows the hurdle test.
Success in both cases is more likely when the proposal author has the skills to:
- Design and plan project, action, or investment outcomes that deliver measurable business value. In other words, success goes to those who plan outcomes that result in tangible progress towards meeting the organization's high-level business objectives.
- Measure and quantify Business Value for both financial and non-financial outcomes. Often, this means the analyst starts by measuring progress towards non-financial targets, such as KPI improvements for customer satisfaction, safety, risk reduction, branding, organizational image, readiness, and employee morale.
- Measure proposal risks in quantitative terms. The proposal writer must build confidence in financial specialists, stakeholders, and sponsors that the proposal minimizes risks and measures what remains.
Sections below show step-by-step how to prepare for the financial hurdle test, and then compute a rate of return for the proposal. See the six-step guide, How to compete and win the financial hurdle rate event, in 6 steps.
The financial math in Steps 2-6 is simple and straightforward. However, the key to hurdle test success appears in Step 1, which advises proposal writers to build business value outcomes into the proposal.
Step 1. Design a proposal action or project with target outcomes that deliver tangible business value.
In simple terms, Step 1 success means planning a project, action, or investment with outcomes that bring measurable progress towards meeting high-level business objectives. The proposal writer who masters these skills before trying to compute a rate of return or build a proposal business case is like the athlete who takes seriously the need to "get in shape" before the race.
For resources on these points, see Related Topics in the Contents section immediately below. See also the footnote links with each of the six step in the How-to guide.
Explaining Hurdle rate in Context
Sections below focus on three hurdle-rate themes.
- Defining and explaining the purpose of the hurdle rate test.
- Identifying business roles in business that are most likely to face the hurdle rate test. These include project and program managers, department heads, product managers,
- A six-step guide to competing in the financial hurdle event. The guide is for everyone seeking funding approval, who must first show that the proposal promises to clear a specific hurdle rate target.
- What is a financial hurdle rate?
- How do you apply the hurdle rate test?
- Which metrics stand-in for proposal "Rate of Return?"
- Whose proposals enter the hurdle event?
- How to compete and win the financial hurdle rate event, in 6 steps
- Step 1. Design a proposal action or project with target outcomes that deliver tangible business value.
- Step 2. Ascertain the specifics of the forthcoming hurdle rate test: Hurdle rate metric, time period scope, minimum passing score.
- Step 3. Estimate costs over their life of the project or action for two scenarios: (1) proposal implementation, and (2) business as usual.
- Step 4. Quantify the business value of action outcomes over the life of the project, investment, or action.
- Step 5. For each period of project life or action life, estimate cash inflows, cash outflows, and net cash flow figures.
- Step 6. Calculate proposal hurdle rate, finish hurdle rate event.
- For more on estimating proposal costs, see Total Cost of Ownership.
- See Business Benefit for more on measuring and valuing proposal benefits—financial and non-financial.
- For more on "Internal rate of return" IRR and "Modified internal rate of return" MIRR, see the article Internal Rate of Return.
- For an introduction to quantitative project risk analysis, see Business Case Risk: Will We Really See These Results?
- See Financial Metrics for an introduction to all essential cash flow metrics and financial statement metrics (Business Metrics, or Business ratios).
- For more on the role of business case analysis in financial justification, see the article Business Case.
Credibility Matters in a Simple Test
In principle, the familiar hurdle rate test has simple data input needs and a simple test process.
The hurdle test requires only two figures as input:
- Input item 1 is a hurdle rate target. This target is the value that the proposal rate of return must exceed. Typically, financial officers set this value.
- Input item 2 is a rate of return for the specific proposal. Usually, the proposal author computes this value from cost/benefit estimates in the proposal.
Only two initial outcomes are possible:
- The proposal rate of return clears the hurdle.
- The proposal rate of return does not clear the hurdle.
However, clearing the hurdle does not by itself guarantee that the proposal passes the hurdle rate test. To pass the test, financial officers and reviewers must also accept the author's rate of return as a credible, realistic estimate of forthcoming investment performance
Who Chooses Hurdle Rate Targets? Can You Ask for A Better Rate?
Firms in private industry view funding awards for capital projects, acquisitions, or particular actions, as business investments. It is a tenet of private industry that business investments must earn a profit. In other words, business firms expect investments to deliver returns that exceed their costs. As a result, the natural source of hurdle rate requirements is the officer responsible for ensuring that the firm invests wisely and that investments justify their costs—the Chief Financial Officer.
In any case, proposal writers and others seeking funding do not calculate or set the hurdle rate targets they face. Their task is merely to ascertain the rate target that applies to a specific proposal.
Nevertheless, proposal authors sometimes have an opportunity to negotiate with the CFO or another finance specialist for a lower target rate. They can do so only when they can argue credibly that the target rate they face seriously overestimates actual investment risks.
Seeking a lower hurdle target this way, incidentally, is not necessarily the hopeless task it may seem to be at first. Financial officers assign risk ratings to projects or acquisitions by referring to failure rates and other known risks for similar projects or acquisitions in the same industry. The proposal author, however, should be preparing professional quality business case support for the specific proposal. With a knowledgable case-builder, this includes trustworthy, quantitative risk analysis. From this, a competent analyst can show that risks for specific proposals are well below industry averages.
One-Size-Fits-All Target Rate or Many Custom Rates?
Financial officers are free to set the hurdle rate as any figure they wish. Usually, however, they calculate target rates carefully with an eye on two factors:
- The cost of raising funds for similar investments.
- Failure rates and other risks for similar investments.
When all or most of the firms' investments are similar in size, cost-of-capital, and risk, the firm may use a single default hurdle target for all proposals. However, when proposals differ significantly on these factors, finance officers typically customize hurdle target rates for individual proposals.
Either way, the hurdle rate target is essentially the sum of two components:
HR Target = Funding Cost Rate + Risk Adjustment
Funding Cost Rate Component
Profit-making firms expect business investments to deliver returns that exceed their costs. With virtually all funding sources possible for business firms, investments in projects, acquisitions, unique actions, or financial instruments come with a measurable cost. The target hurdle rate represents this cost with a funding cost component in the HR target rate.
- When firms use their available cash assets to fund a proposal, the investment "cost" in view is an opportunity cost. By investing in Proposal A, for instance, the firm is foregoing its ability to use the same funds in other investments--even including bank deposits.
Many firms use their own weighted average cost of capital (WACC) for this purpose. WACC, in turn, is often a blended average of the firms cost of debt funding and cost of equity funding.
- Firms sometimes borrow funds to make investments, either through bank loans or through bond issues. Proposals seeking funding from loans or bond sales usually face a hurdle rate cost component equal to the firm's cost of debt. The Cost of debt is the weighted average interest rate the firm pays for all outstanding debt.
- Firms also finance investments with equity funding, that is, by issuing new shares of stock to raise capital. In such cases, the HR funding cost component is usually the firm's cost of equity (COE). The COE is the return rate that stock market investors require for bearing ownership risks.
Individual finance officers sometimes use other metrics for the funding cost component of the target rate. Some turn to metrics such as Return on Capital Employed, Return on Assets, or Return on Equity. Most choose WACC as the hurdle rate, however. They probably select WACC because these same officers will also find a predicted "Internal rate of return" (IRR) for the proposal. The hurdle test, then, compares proposal IRR to the WACC hurdle rate.
Incidentally, using IRR and WACC together this way is standard practice in finance. In brief, when investment IRR is higher than WACC, those with financial training usually see the investment as a net gain. And, when IRR is less than WACC, they view it as a net loss.
Risk Adjustment Component
Nearly all Investments come with at least some level of risk. The metrics above already recognize an element of risk: WACC, Cost of Debt, and Cost of Equity. Beyond this, however, financial specialists may view a particular proposal as especially risky and raise the hurdle target further by adding a risk adjustment component to the HR target.
Financial specialists usually consider new product development projects as riskier investments than infrastructure upgrade projects, for instance. They typically see higher risk levels in costly, long-term capital building projects, such as building long-distance power transmission line. Riskier investments like these can expect a hurdle rate target that includes a high-risk adjustment component, adding several percentage points or more the rate.
The six-step guide below shows proposal writers authors how to prepare for the financial hurdle test and how to produce a proposal rate of return for the test. (See below, How to compete and win the financial hurdle rate event, in 6 steps). Early in the process, Step 2 advises the author as follows:
Step 2. Ascertain the specifics of the forthcoming hurdle rate test: Hurdle rate metric, time period scope, minimum passing score.
Prudent proposal writers will also execute Step 2 as early as possible.
Textbooks in finance and economics use the term rate of return for the calculated financial metric that proposal writers bring to the hurdle test. The intent is to assure stakeholders and owners that the investment is profitable and that risk levels are acceptable.
That purpose is fine, in theory, but the practical problem remains that Rate of Return does not have a single, standard definition. Quite a few familiar metrics arguably qualify as "rate of return" measures. These include Internal Rate of Return (IRR), Modified Rate of Return (MIRR), Average Rate of Return (ARR), Simple Return on Investment (ROI), Return on Assets (ROA), Return on Capital Employed (ROCE), and Return on Equity (ROE)—to name a few.
CFOs Usually Prefer IRR for the Hurdle Test
Every one of these seven investment metrics turns up now and then as the designated rate of return fora hurdle test. All are possible because the hurdle rate metric is a judgment call from the Finance Department. Individual finance officers develop, over time, preferences for specific metrics they believe serve in their companies and their industries. As a result, a first-time proposal writer asking "how to compute a rate of return" for the hurdle test, may receive instructions for calculating any of the seven metrics above.
With those possibilities in mind, however, proposal writers should also know that the vast majority of financial specialists usually ask hurdle rate participants for one metric in particular: the internal rate of return (IRR).
What You Need to Know to For Your Proposal
Sections below include a step-by-step guide to optimizing proposal performance in the financial hurdle rate test. (See below, How to compete and win the financial hurdle rate event, in 6 steps). Step 2 in that process advises gathering information on three key points:
For more on these points and links to online resources, see Step 2, below.
Many people first encounter the hurdle rate concept as part of the capital budgeting process.
The hurdle rate is also center-stage, however, in quite a few other business processes. In reality, the hurdle rate can turn up anywhere that managers and reviewers receive, evaluate, and prioritize funding requests. The hurdle rate test is standard practice, now, in all of these areas:
Capital Budgeting and Capital Review
Capital budgeting typically begins with a capital review at the start of a capital budget cycle. For this, a Capital Review Committee solicits spending proposals and funding requests, organization-wide, for capital acquisitions and capital projects. The committee also sets a limit for total capital spending—a capital spending ceiling.
Usually, the funding request total exceeds the capital spending ceiling, and this means that the committee will not fund every request. Incoming proposals must therefore compete for available funds. As a result, the Review Committee's primary tasks are to evaluate and prioritize all incoming submissions. For each proposal, evaluation begins with the hurdle rate test.
Project Management Office
PMOs in some organizations receive a large number of project proposals. The result is a heavy evaluation workload for a few PMO officers. Consequently, many apply the hurdle rate test to each income proposal, before taking on full-scale project proposal reviews.
Project proposals that clear the hurdle then move on to a thorough review and further consideration. The rest are non-starters.
Product Management Office
Competition is intense, and product life cycles are short in some In industries and markets. In such cases, productd managers may submit new product proposals in high volume. Companies usually expect to bring only a small percentage of these to market.
In-depth reviews of product proposals will examine many factors, including marketing and sales considerations, of course, but also alignment with the company's overall product strategy. Before reaching the in-depth review, however, proposal sponsors may have to submit to the hurdle test.
Information Technology Directors
IT departments usually support units across the entire organization. As a result, IT directors sometimes receive a substantial number of proposals. These may include, for example, requests for new devices, new applications, new IT capabilities, or various other IT projects.
Most IT units, however, do not have the time and resources for meeting all incoming requests. Consequently, IT directors spend much of their own time evaluating and prioritizing IT support requests. Therefore, IT directors often require business case support with incoming proposals. And, they may choose to assess fully only those proposals that pass an initial hurdle rate screening test.
Continuous Improvement & Innovation Groups
Continuous Improvement / Innovation Groups. Some organizations create and charter groups specifically to facilitate "continuous improvement" or "innovation." These groups also receive action proposals from across the organization. And, such proposals typically vary substantially, in nature, size, and scope.
Group members will then evaluate incoming proposals regarding feasibility, risks, and added value to the organization. When proposal volume is high, the time and resource demands on group members also climb. In such cases, group managers can use the hurdle rate test to disqualify weak proposals early.
Those requesting funds can take the six concrete steps below to maximize their chances of passing the hurdle rate test.
Will the proposal pass the hurdle rate test? The answer depends, above all, on the proposal writer's ability to plan a project, action, or investment that delivers tangible, measurable business value—value that outweighs investment costs.
Bringing a high rate of return to the hurdle test may clear the target rate, but that by itself does not guarantee passing the test. Most proposals that fail the hurdle test actually clear the hurdle. They fail the test, however, because financial officers and reviewers do not believe the proposal can deliver returns at that rate.
Success in the hurdle test—and the business case review that follows—goes to proposal writers who can promise business value with credibility.. They must show in quantitative terms why and how the action does that. Usually, this simply means planning a project, action, or investment that brings tangible progress towards meeting high-level business objectives.
Success in Step 1 is more likely when the proposal author has the skills to:
- Design and plan project, action, or investment outcomes that deliver measurable business value. This usually means planning outcomes that are tangible progress towards meeting the organization's high-level business objectives.
- Measure and quantify Business Value for both financial and non-financial outcomes. This often means measuring progress toward non-financial targets, such as KPI improvements for such things as customer satisfaction, safety, risk reduction, branding, organizational image, readiness, and employee morale.
- Measure proposal risks in quantitative terms. The proposal writer must build confidence in financial specialists, stakeholders, and sponsors that the proposal minimizes risks and measures what remains.
For more on building and measuring business value for financial and non-financial outcomes, see the online articles Business Benefits and Business Case. For a complete introduction to business case analysis and practical guidance for proposal writers, see the ebook Business Case Essentials.
For Step 2, the proposal writer ascertains several hurdle test specifics. It is always helpful to have this information as soon as possible.
The writer can gauge proposal costs and benefits, roughly, even before finishing Step 1. Sometimes this information is an alert that plans in progress are heading for hurdle test failure.
The sooner it is clear that a proposal is on a losing course, the easier it is to start over and re-design the proposal from the ground up.
In Step 2, the proposal writer benefits from ascertaining certain information on hurdle test specifics.
- Hurdle Rate Metric, the specific calculation that will represent the proposal's "rate of return" in the hurdle test. The metric of choice is usually the Internal Rate of Return (IRR), but If not, the CFO will ask for another standard investment metric such as MIRR, ROI, ROA, ROE, ROCE, or Average Rate of Return.
Knowing which metric to compute also identifies the metric's input data needs. These will certainly include the proposal's cash flow forecasts. When the hurdle metric is IRR or ROI, the cash flow forecasts will suffice. Other possible metrics may also require items from the firm's Income Statement and Balance Sheet.
- Investment Lifespan,, The "rate of return" concept and the metrics that stand-in for it always refer to a specific time period as Investment lifespan.
The time periodin view may be as short as a few weeks (e.g., for investments in short-term trading securities or small engineering projects), or as long as several decades (e.g., for capital projects that deliver long-lasting assets such as ships or buildings).
- For capital acquisitions, the period in view may be the asset's service life, or economic life, or depreciable life.
- For Capital projects that deliver long-lasting capital assets, the period will be the project life span plus the asset's life span (service life, economic life, or depreciable life).
- For Investments in Special Actions, such as initiatives or campaigns, the period in view is the life of the action.
- For Securities Investments, the investment lifespan is the length of time the firm expects to hold the investment. For long-term investments with an indefinite life, the firm may choose instead to use arbitrary timesapn, such as the first 3, 5, or 10 years of investment life.
- Target Hurdle Rate. The value that the proposal's metric must exceed to pass the hurdle rate test.
This information usually originates with the CFO, but the proposal writer should first try to ascertain these specifics directly from the individuals who pass judgment on the proposals. This may be the CFO, but it may also be a Budget Director, PMO officer, Validation Committee member, or the Chair of a Review Committee.
Read more on Step 2 hurdle test specifics in the following:
- For more on the choice of hurdle rate metric see, above, Which Metrics Represent Proposal Rate of Return?
- See Financial Metrics for a comprehensive survey of cash flow and financial statement metrics, including IRR, MIRR, ROI, ROA, ROE, and ROCE. This article also links to example calculations and guides to interpreting each metric.
- For more on the nature and meaning of the Target Hurdle Rate see, above, Applying the Hurdle Rate Test.
Hurdle rate metrics are essentially investment metrics. To play this role, IRR, ROI, and other metrics compare investment returns to investment costs. Each of these metrics makes the comparison in its own way.
Proposal writers aiming for the hurdle test must therefore complete Step 3 and Step 4. These steps summarize the cash flow values of investment costs (Step 3) and investment returns (Step 4).
Fnding costs specifically due to the investment may require the writer to estimate investment period costs for two scenarios: (1) A proposal implementation scenario, and (2) a Baseline or Business as Usual Scenario.
Two scenarios are necessesary when the same cost objects incudor costs regardless of whetheror not the firm implements the proposal.
To estimate investment costs, first ascertain the time scope, or life, of the investment (Step 2, above).
- For capital asset acquisition proposals, investment costs will cover the complete results of a total cost of ownership (TCO) analysis. These will include purchase cost, of course, but also the costs of selecting, ordering, financing, operating, maintaining, updating, and disposing of the asset, over the full asset life.
Finding costs due specifically to the acquisition may require comparison of separate TCO studies for (1) Proposal implementation, and (2) Business as Usual. Costs due only to the proposal action are the incremental differences costs between cost figures in the two scenarios.
- For investments in projects, initiatives, or campaigns, the manager's planning details should include cost estimates for the life of the action.
Finding costs due specifically to these actions may also require comparison of separate TCO studies for two scenarios, Proposal implementation, and Business as Usual.
- For investments in financial securities, investment costs include securities purchase, of course, but also any brokerage fees, financing costs, or interest fees that apply.
To prepare for the hurdle metric calculation, the proposal writer estimates the cash flow value of each period's total costs. The example below shows how to arrange these cost data for the hurdle test.
Example Cost Cash Flow Summary
The table below summarizes cost estimates for a proposel 4-Year marketing campaign, subject to a hurdle rate test before receiving funding. The task is to find investment costs due specifically to implementing the proposal.
The analyst must recognize, however, that the firm will incur costs and spend for the same five cost items in the table, with or without the campaign. As a result, the analyst produces 4-year cost estimates for two scenarios: (1) A Proposal implementation scenario, and (2) a Baseline, or "Business as Usual" Scenario. The analyst measures measure costs specifically due to the campaign as differences between line item costs on the two scenarios.
The Step 3 goal is to obtain the Net incremental cash outflow, for each year of the analysis period. The yearly results appear as Incremental CF in the bottom line of the third panel, the Incremental Outflows table. These figures enter the rate of return metric calculation (IRR calculation) in Step 5.
For more on Step 3 cost estimates, see the following:
- The article Total Cost of Ownership is a complete introduction to finding both the obvious costs and the hidden costs that come with asset ownership.
- See the Article Cost Savings, Avoided Costs, and Opportunity Costs for more on the role of these cost events in cost/benefit analysis.
- See the ebook Business Case Essentials for step-by-step guidance estimating proposal costs and business benefits.
Action for its own sake has little value for the organization. Projects, programs, acquisitions, and investments that help reach business objectives, do have business value.
The Step 4 goal is to find evidence for reviewers and decision-makers that builds confidence that proposal funding will bring business benefits. The Step 3 goal was to summarize investment costs. Step 4 aims to measure and summarize likely investment returns.
Investment costs and returns have the spotlight in the hurdle rate test and in the business case review that follows.
Finding and measuring the value of returns means showing exactly where proposal outcomes contribute to meeting business objectives, and by how much. Step 4 begins with a survey of the organization's targets for significant business objectives. These will include both financial objectives and non-financial objectives.
- Financial Objectives.
Define and measure these goals in financial terms, such as cost savings, cash inflows, sales revenues, or profits.
The financial objective's definition also describes how to measure progress towards the objective.
- Non-financial Objectives.
Define and measure these goals first in non-financial terms. Non-financial objectives include targets on key performance indicators (KPIs) for qualities such as customer satisfaction, customer retention, market share, time-to-market, time-to-manufacturing, accident rates, brand loyalty, company image, military readiness, risk reduction, numbers of disciplinary actions.
Analysts measure tangible progress towards non-financial targets in non-financial terms (KPIs). The task, then, is to find and assign financial value to the consequences of KPI changes.
Example Cash Flow Returns Summary
The table below summarizes returns for a proposel 4-Year marketing campaign, subject to a hurdle rate test before receiving funding. Cash flow cost estimates for the same proposal appear in Step 3, above.
The firm defines returns for this proposal as annual gross profits for the company's offerings in two product lines, Line A and Line B. The firm will sell and profit from both product lines, with or without the marketing campaign.
To measure returns due specifically to the campaign, the analyst forecasts gross profits from two scenarios. (1) Proposal Implementation, and (2) Baseline, or Business as Usual Scenario. In such cases, returns due specifically to the proposal are the differences between line item profits on the Baseline and the Proposal scenarios.
Step 4 develops the Net incremental cash inflow for each year of the analysis period. The yearly results appear as Incremental CF in the bottom line of the third panel, the "incremental (IRR calculation) in Steps 5 and 6.
See the following resources for more on measuring business benefit returns.
Step 5 prepares data for calculating the proposal rate of return in the hurdle test.
Step 3 summarizes proposal cost estimates as a series of cash outflows. Step 4 finds proposal returns, or gains, and values them in a series of cash inflows. Step 5 brings together the inflow and outflow data and arranges the figures as input for the hurdle metric.
To prepare data for the hurdle metric, the analyst refers to two items of information from Step 2:
- Step 2 ascertains the name of the financial metric that represents the proposals rate of return in the hurdle test. This metric is usually Internal Rate of Return (IRR). However, financial officers sometimes name other metrics for this role, such as simple Return on Investment (ROI).
Naming the metric tells the analyst which cash flow data to deliver in Steps 5 and 6.
- Step 2 also finds the investment lifespan and specific periods within that. The time span is usually a number of months or years, and the span periods are specific months or years.
Cash Flow Example 1: Single Scenario Case
When proposing investments in financial securities, the analyst forecasts cash inflows and outflows for only one scenario—the Proposal Scenario. Only one scenario is necessary because the investment costs and returns are clearly due specifically to the investment.
The table immediately below shows the data necessesary for the IRR metric and also simple ROI.
- The IRR metric expects, as input, a net cash flow figure for each period, the table third line. Note that the cash flow for "Year 0," the immediate cash flow at the start of the investment life.
- The simple ROI metric expects, as input, separate cash inflow and outflow figures for each period. These cash flows appear in the table first and second lines.
Here, the analyst anticipates finding IRRfor the proposal and therefore extracts the net cash flow figures, below, as Net CF Data for Analysis.
Cash Flow Example 2: Two Scenario Case
For analyzing projects, acquisitions, or other actions, with any form of investment cost/benefit or investment analysis, the analyst needs at least two sets of cash flow forecasts. Developing the data for IRR, ROI, NPV, or other investment metrics requires inflow and outflow estimates for a Proposal Implementation Scenario and a Baseline, or Business as Usual Scenario.
In these cases, the firm continues incurring costs and realizing returns from the same cost and benefit line items, whether it does or does not implement the proposal. The cash flow increments due specifically to the investment action are the difference between line item costs on the two scenarios.
The table below presents cost and return cash flow estimates from examples in Step 3 and 4 above. The bottom panel below shows how these combine to produce incremental cash flow data for the hurdle metrics.
- Input data for the IRR metric are the Net Cash Flow figures in the bottom line of the third panel. Anticipating the IRR calculation, the analyst extracts these figures and presents them below the table as Net CF for Analysis, the investment metric.
- Input data for the ROI metric are the Incremental Cash Inflows and Incremental Cash Outflows in Lines 3 and 6.
For more on data and calculations for investment metrics, see the following:
- The article Internal Rate of Return is a complete introduction to finding, analyzing, and understanding the investment metrics Internal Rate of Return (IRR) and Modified Internal Internal Rate of Return (MIRR).
- The article Return on Investment explains and illustrates the investment metric Simple Return on Investment (ROI).
Step 6 is the hurdle rate test, itself. The test is, in principle, very simple and straight forward.
The proposal writer calculates the hurdle rate metric, and then compares that to the target rate. When the metric exceeds the target rate, the proposal passes the test.
In reality, however, clearing the hurdle is only the beginning of the challenge facing the proposal writer. Often, proposal metrics clear the hurdle, but the analyst or author must then convince skeptical CFOs, budget directors, and review board members that the proposal rate of return is accurate.
In business everywhere, those seeking funding approval know in advance the passing score for the hurdle test. Very few show up for the test with a losing score in hand. In business today, most proposals that fail the test lose because financial officers and reviewers do not believe the proposal will deliver the returns it promises.
Those who submit funding proposals should always prepare to make a case for the reality of their hurdle metrics. Proposal authors should be ready to explain:
- Assumptions underlying cost and return estimates, such as assumptions about future business volume, costs, labor requirements, and an on-time finish.
- Credible evidence that Step 3 cost data include all relevant costs, but only relevant costs.
- Credible evidence that Step 4 returns (gains) will follow implementation.
- Transparent cash flow accounting for Proposal and Baseline Scenarios, and proof that input data for the rate of return metric are incremental cash flow data.
Example IRR Result For the Hurdle Rate Test
Hurdle event participants must usually appear for the test with an Internal Rate of Return (IRR) figure in hand. Examples in Steps 3, 4, and 5 show how to prepare cash flow data for finding IRR. The example below shows the IRR result from these data.
In this case, the analyst learns in Step 2 that the target hurdle rate for this proposal is 15.0% The actual proposal hurdle IRR of 21.6% clears the hurdle with percentage points to spare.
Before celebrating, of course, the analyst must be sure that the CFO, PMO officers, the Review Committee Chair, or anyone else refereeing this event accepts the IRR result.
Notes on "Computing" IRR
It is more accurate to say that analysts "finds" IRR, rather than "calculate IRR. The IRR metric has a mathematical definition that does not lead to a simple formula for solution.
IRR Definition: The internal rate of return is the interest rate for which the net present value of all proposal cash flows equals 0.
Analysts find the actual IRR value with a process that looks, at first, like "trial and error." More accurately, the process that leads to an IRR result is "Successive Approximation:" For this, the analyst or the spreadsheet calculates an NPV for a series of net cash flow figures, like those near the bottom of the table above. The process repeats over many trials, using a different discount rate each time. Trials repeat until a discount rate brings an NPV of 0. That rate is the IRR.
In practice, most people use a spreadsheet handle the successive operations, out of sight, until an IRR result appears. In Microsoft Excel, for instance, a cell showing an IRR result holds a formula like this: "=IRR(B2:B:6,0.1)"
- B2:B6 is a spreadsheet range of five cells. Each holds a net cash flow figure. Together, cells hold the proposal cash flow stream.
- The 0.1 is an initial "guess" for the IRR. This guess merely serves as a starting point for approximation trials. Tests continue until it finds a rate that produces NPV=0. Trials continue until it finds a rate that produces NPV=0.
The spreadsheet finds this solution very quickly, even if it has to run hundreds of trials. For the spreadsheet user, IRR results seem to appear instantly.
For more resources on calculating and interpreting IRR, ROI, and other investment metrics, see the following resources: